Peer to Peer Networking

The network setting or IP Addressing where the computer automatically obtains its IP Address from the router.

The materials needed to conduct a Peer-to-Peer Network includes 1 router with power cable and what type of cable?

The port on a router where you connect a UTP cable to link a computer or local device.

The section in the router configuration where you can change the network name (SSID) and password.

The IP Address class that ranges from 1.0.0.0 to 126.255.255.255 and is used by large networks such as multinational companies.

The default URL usually used to access the router’s configuration page in a browser.

The Windows command used to check a computer’s current IP Address configuration.

The type of network connection that allows two computers to communicate and share files using a router and UTP cables.

The IP Address class that ranges from 192.0.0.0 to 223.255.255.255 and is commonly used for small networks such as in homes or schools.

The router part where you plug in the cable that connects to your Internet Service Provider (ISP) or modem.

It is a unique numerical label assigned to each device connected to a computer network

The Control Panel section where you can open the “Network and Sharing Center” to modify network properties.

This device must be connected to a power source before linking it to computers using UTP cables.

Manual or Fixed IP Address of a computer

The part of the router where you can connect the power adapter to supply electricity.

The IP Address class that ranges from 128.0.0.0 to 191.255.255.255 and is used for medium-sized networks.

The default gateway address or access point in a network, usually referring to the router’s internal IP Address.

The unique name assigned to a wireless network, which helps users identify it when connecting via Wi-Fi.

The Windows command used to test the connectivity between two devices or between a computer and the router.

The default IP Address usually used to access the router’s configuration page in a browser.

A small button on the router used to restore factory settings or erase all previous configurations.