Welding process where a wire electrode flows out from the center of the welding gun is called?
TIG
MIG
Brazing
Stick
What type of drive system does this mechanical fastener have?
Square
Allen
Torx
Clutch
This photo represents which type of joint?
Rabbet
Butt
Edge & Edge
Lap
Which of the following is not a mechanical fastener?
Tape
Rivet
Nail
Staple
The three main methods for driving in nails are?
Slam, Push, Pull
Pneumatic, Power, Pierce
Power, Powder, Pound
Powder, Pound, Pierce
A long thin piece of metal that is sharp at one end and has a head on the other is called?
Staple
Nut
Adhesive
Nail
What installation method is used when connecting wood to concrete or metal in construction?
Gas
Powder
Electric
Pneumatics
This type of metal fastener uses an alloy of Tin or Lead to fuse objects to one another.
Soldering
Brazing
MIG Welding
Stick Welding
A hardware device that mechanically joins two or more objects together is called?
Handle
Hinge
Abrasive
Fastener
The four main types of nails that we discussed in class are?
Common, Finish, Field, Fro
Common, Finish, Casing, Box
Finish, Casing, Blunt, Field
Common, Brow, Lag, Shank
The photo represents which type of joint?
Rabbet
Dovetail
Mortise & Tenon
Butt
This photo represents which type of joint?
Miter
Dovetail
Dado
Edge to Edge
SMAW stands for what?
Same Metal Arc Welding
Shield Mirrored Acetylene Welding
Soft Metal Arc Welding
Shield Metal Arc Welding
A substance, such as paste or cement, which causes two surfaces to stick together is called?
Abrasive
Joint
Adhesive
Clamp
This photo represents which type of joint?
Rabbet
Butt
Edge to Edge
Mortise & Tenon
A metal pin for passing through holes in two or more pieces, heated then hammered into place.
Cotter Pin
Bolt
Rivet
Biscuit
The close securing of two or more pieces of wood is called a ________?
Joint
Attachment
Closure
Hinge
safety is a crucial part of the welding process since you are exposed to extreme _____ & _____.
Cold & Light
Heat & Darkness
Friction & Gasses
Heat & Light
What unit of measurement indicates the size of a nail?
Gram
Pound
Dime
Penny
This photo represents which type of joint?
Edge to Edge
Mortise & Tenon
Dado
Miter
A manual arc welding process that uses a consumable electrode covered with flux is called?
MIG
FIG
TIG
Stick
TIG stands for what?
Titanium Inert Gas
Tungsten Inferred Gas
Titanium Inferred Gas
Tungsten Inert Gas
This photo represents which type of joint?
Miter
Butt
Edge to Edge
Dado
This photo represents which type of joint?
Lap
Dado
Edge to Edge
Butt
Joining together metal/plastic by heating the surfaces to the point of melting is called?
Welding
Forming
Shaping
Molding
An inclined plane wrapped around a nail, typically metal and contains a "thread" is called?
Nail
Bolt
Staple
Screw
What type of drive system does this mechanical fastener have?
Slotted
Clutch
Phillips
Square
This process uses a specialty heat gun with added plastic rod to join two pieces of plastic.
Fetty Wap
Plastic Welding
Plastic Transference
Shear Stopper
What type of drive system does this mechanical fastener have?
Square
Phillips
Slotted
Allen
An arc welding process that uses a non-consumable tungsten electrode to produce the weld.
TIG Welding
Stick Welding
Soldering
MIG Welding
What type of drive system does this mechanical fastener have?
Allen
Square
Clutch
Torx
A device designed to bind, constrict or press two or more parts together to hold them firmly.
Shank
Joint
Potato
Clamp
What type of drive system does this mechanical fastener have?
Slotted
Allen
Torx
Square
Auto darkening welding helmets use either ___or___ power to initiate the darkening.
Gas, Wind
Solar, Water
Solar, Battery
Battery, Gas
This device relies on a controlled explosion created by a small chemical propellant charge.
Pound Actuated Fastener
Powder Actuated Fastener
Pounding Force Fastener
Power Hammer Fastener
A U-shaped metal bar with pointed ends for driving into wood used to hold wires is called?
Clamp
Shank
Adhesive
Staple
This photo represents which type of joint?
Lap
Miter
Dado
Edge to Edge
Mechanical fastener with an external male thread that requires either a threaded hole or nut.
Joint
Staple
Bolt
Nail
What type of drive system does this mechanical fastener have?
Slotted
Phillips
Square
Allen
GMAW stands for?
Gas Metal Actuated Welding
Gas Mercury Actuated Welding
Gas Metal Arc Welding
Gypsum Metal Arc Welding