Study

Racing 2nd - Unit 5

  •   0%
  •  0     0     0

  • Turning power
    Centrifogal force
  • The two typres' contact patches are the motorcycle's connection to the ground so they are fundamentañ to the motorcycle's suspension .......
    Behaviour
  • What is number 8?
    Thread pattern
  • Which type of tyre is number 6?
    Off road - enduro
  • ..... occurs when the suspension extends fully and cannot mechanically extend any more.
    Topping out
  • Decreasing preload decreases / increases sag, enhancing comfort and traction.
    increases
  • The hard surface of a road
    Pavement
  • Increase preload reduces / increase sag, making the suspension stiffer and more responsive.
    reduces
  • ...... is the difference betweeen the fully extended lenghts of the suspension and the lenght compressed by the weight of the motorcycle and rider.
    Total sag
  • The "amount" of use of a tyre
    wear level
  • What is number 1?
    Crown area
  • Which type of tyre is number 5?
    Retreaded tyre
  • What is number 1?
    Steel belt
  • To tolerate force of more throttle
    Bear acceleration
  • What is number 2?
    Inner liner
  • A motorcycle tyre is the .......... part of a motorcycle wheel. It is attached to the .......
    outer / rim
  • What is number 2?
    Shoulder
  • ...... is used to adjust the inicial position of the suspension with the weight of the motorcycle and rider acting on it.
    Pre-lod
  • ...... occurs when the suspension is compressed to the pint where it mechanically cannot compress any more.
    Bottoming out
  • With a .............. construction, the ply cords radiate out at 90-degree angles to the center line of the tread.
    Radial