Coating Overview | Baamboozle - Baamboozle | The Most Fun Classroom Games!

0%

0 0 0

What form do you use for the Electronic Package?

FM-00030

What vacuum spreads the slurry over the part?

High vac

What is the definition of combo coating?

Coating the entire part on one side of the machine using an air cannon

How many functions does station 1 have?

2 (Load and Unload)

What drying station is first used to dry the part?

Finesse

How many millimeters are there in 1 inch?

25.4

Can a lot ran using slurry out of a blue drum be considered a lockdown run?

No

What are the three drying zones?

Finesse, intermediate, and final

How many inserts are considered a full set for builds 2-8

88

You should check the hoods for parts that have fallen out of inserts at every changeover?

True

Lot has 3000 pounds of slurry that is diluted wet gain is 250 how many parts can I run if I run the tank dry?

5443

You are running a lot with 150 wet gain this is not a zone coat what is your wet gain on each side?

75

Immersion depth tells how much the part is:

Dunked into the slurry pan

When running zone coats CW1should always be on Loop A and CW2 on Loop B?

True

What vacuum pulls the slurry into the part

Low vac

Does station 7 and 14 perform the same function

Yes

What station number is the part flipped, but not for weighing purposes?

7

How many drying stations are on the MCC IV? (Builds 2-6)

11

A digital x-ray must be taken at the start of every Lot?

False

Heat Recovery is supplied from what SCR?

96 and 2000