Share MSSC Tolerancing
Save to Folder
A part measuring 44.85 mm in a process with a tolerance of 45mm +/- .28 is considered in or out of spec?
In spec (within the tolerance range)
The basic dimensions shown on a print are called __________ dimensions.
Nominal
The specification for parts being produced at a workstation is 1.842 ± .005. Is a part that has been produced at 1.836 in or out of spec?
it is out of spec
Tolerance is the total amount by which a specified __________ is allowed to vary and still be a good part.
Dimension
If a product feature has a dimension of 1.8 ± .03, what is the lower tolerance dimension?
1.77
0.001 reads__________.
One thousandth
Which method of tolerancing places the tolerances next to each dimension?
Direct
Which type of dimensioning uses a common reference point?
Baseline
Internal dimensions, like holes, are at their MMC when they are at their upper or lower limits of their tolerance zone?
Lower limit
What symbol means maximum material condition in geometric dimensioning and tolerancing?
M in a circle
T/F Allowance is the tightest possible fit, while clearance is the loosest possible fit.
True
Which type of fit is used when there is to be no movement between the parts?
Interference fit
Geometric dimensioning and tolerancing is used to define parts based on how they?
function
Of the five geometric features that are commonly toleranced, which describes the shape of a plane or circular type surface of a part?
Form
What does the symbol below illustrate?
Concentricity
What refers to tolerances that control form, profile, orientation, location, and runout?
Geometric dimensioning and tolerancing
