unit 12 m2 | Baamboozle - Baamboozle | The Most Fun Classroom Games!

English 10 Public

Study Slideshow

What occurs when RF fields of probes are interact with each other?

voltage drops

linear range occurs

crosstalk occurs

side view occurs

What occurs when probe does not have enough side clearance around the tip?

d. voltage drops

b. crosstalk occurs

a. linear range occurs

c. side view occurs

What is the un-reliable reading Gap section shown in the performance curve?

0 to 20 mils

35 to 95 mils

0 to 10 mils

25 to 75 mils

What is the scale factor shown in the performance curve?

200 volt/mil

200 mv/mil

20 volt/mil

20 mv/mil

What is the reading on the micrometer shown?

b. 245 mils

c. 165 mils

a. 255 mils

d. 265 mils

What is the reading on the micrometer shown?

b. 217 mils

a. 213 mils

d. 242 mils

c. 238 mils

What angle is used when installing Vibration probes

a. 45° from the vertical

c. 90° from the vertical

d. 70° from the vertical

b. 25° from the horizontal

What is the primary function of a transducer’s performance curve?

b. to set the gap on the probe

c. to be used as a maintenance record

a. to calibrate the proximitor

c. to reveal the transducer’s scale factor and linear range

When do side view problems occur?

the system components are mismatched

the dc voltage supply is too low

a probe is mounted in an area with not enough side clearance

two probes are mounted too close together

When do crosstalk problems occur?

when two probes are mounted too close together

when the system components are mismatched

when a probe is mounted in an area with not enough side

when the dc voltage supply is too low