Before using a pick, check to be sure that the head is _____. a. rotated 90 degrees b. blunt c. positioned at chest height d. fixed firmly to the handle

Another name for a machinist's hammer is _____. a. ball-peen hammer b. claw hammer c. veneer hammer d. sledgehammer

How many sides does a hexagonal shape have? a. Four b. Five c. Six d. Seven

Because of the shape of its jaws, which clamp can spread clamping pressure over a wider area than the others? a. A C-clamp b. A bar clamp c. A hand-screw clamp d. A spring clamp

A heavy-duty tool used to drive posts or other large stakes is a _____. a. mallet b. sledgehammer c. bell-faced hammer d. ball-peen hammer

The saw shown in the figure above is called a _____. a. keyhole saw b. drywall saw c. coping saw d. hacksaw

To quickly run a nut onto a bolt that resists spinning it on with the fingers, you can drive the socket with a(n) _____. a. striking wrench b. open-end wrench c. speed handle d. breaker bar

Because of its stiffness, a folding rule is better than a cloth or steel tape for measuring _____. a. vertical distance b. horizontal distance c. inside dimensions d. circular diameters

The type of screw shown in the figure above is a(n) _____. a. Phillips head b. Torx® c. Allen® d. Robertson®

The safest kind of utility knife is one with a _____. a. retractable blade b. replaceable blade c. folding blade d. self-retracting blade

When using a utility knife, place a piece of scrap material under the object you are cutting in order to _____. a. see the object more clearly b. keep the blade sharp c. protect the surface under the object d. avoid electrocution

The proper angle for the edge of a cold chisel is _____. a. 90 degrees b. 60 degrees c. 45 degrees d. 30 degrees

The type of clamp shown in the figure above is a _____. a. bar clamp b. C-clamp c. pipe clamp d. spring clamp