Two or three decimetres long. It measures in millimetres and sometime in other units too.
Oops!
Check
Okay!
Check
15
This tool holds parts for drilling.
Clamp
Oops!
Check
Okay!
Check
15
Name and function?
Sandpaper! It is used for smoothing down surfaces after filing.
Oops!
Check
Okay!
Check
15
A bench press does what?
Holds parts in position. It is fixed to the table.
Oops!
Check
Okay!
Check
15
Spanners do what?
They are used for tightening or loosening nuts and bolts. The number on the spanner is the length in millimetres of the nut that it should be used with.
Oops!
Check
Okay!
Check
15
This tool is used for tightening or loosening slotted screws and cross-recessed screws - hint, there are two types.
Flat-blade screwdriver / Philips screwdriver
Oops!
Check
Okay!
Check
heart
Other team wins 10 points!
Oops!
fairy
Take points!
5
10
15
20
25
rocket
Go to first place!
Okay!
thief
Give points!
5
10
15
20
25
15
What does a pencil do?
It is used for marking on paper or wood.
Oops!
Check
Okay!
Check
seesaw
Swap points!
Oops!
seesaw
Swap points!
Okay!
fairy
Take points!
5
10
15
20
25
lifesaver
Give 5 points!
Oops!
15
This tool is for hitting and transmitting force to another part of tool. It can also be used to pull out nails.
Claw Hammer
Oops!
Check
Okay!
Check
15
This tool is great for removing nails, holding or cutting.
Pincers
Oops!
Check
Okay!
Check
15
What does a bar clamp do?
Clamps parts to the table or holds two parts together.
Oops!
Check
Okay!
Check
15
What does a jigsaw do?
Used for cutting wood or metal (using a different blade) with a thickness of less than 7cm
Oops!
Check
Okay!
Check
15
What is this called and what does it do?
A Caliper! It measures small lengths (a few millimetres.) Measures inner, outer and depth gauges.
Oops!
Check
Okay!
Check
15
This tool holds down parts that need to be bent, cut or hammered. They are also used to bend wires and a specific type are used to make loops?